ZRW460-3WC Wireless Beacon (White with Clear Flash)

ZRW460-3WC WIRELESS BEACON, WALL MOUNT /W BATTERY PACK (White W/ CLEAR FLASH)

  • Fully addressable
  • Wire free operation with no external aerials
  • EN54:25 approved 868 MHz frequency bands
  • Two way communication
  • Dual, supervised battery sources
SKU: ZRW460-3WC Categories: , , Tags: ,

Description

The ZRW460-3WC Wireless Beacon is a wireless, wall mount, addressable ZP7 series VAD (Visual Alarm Device) designed for indoor applications. It provides a visual warning of a fire alarm condition in areas where the installation of cabling is not an option.

The ZRW460-3WC Wireless Beacon is approved to EN54:23 and EN54:25 and CPR certified as a VAD with a rating of W-3.1-11.3, allowing each VAD to be mounted up to 3.1m high and provide coverage for a room size of up to 11.3 x 11.3m with a single device.

Signal Integrity

The ZRx460 VADs are controlled directly from the CIE via a loop wired radio interface module. This arrangement allows both wireless and hardwired devices to be seamlessly located on the same loop wiring if required. Installed as part of a ZP addressable fire system, up to 127 devices may be connected to each of the CIE loops. Each wireless device is assigned its own address with which the main control panel communicates, providing the same system facilities as directly wired devices. To ensure the highest signal integrity the unit receives and transmits status and alarm conditions by EN54:25 certified, wireless links. ZRx460 VADs have no external aerials.

The Range

The ZRx460 series VADs forms part of an extensive range of wireless fire alarm devices which includes smoke and heat detectors, manual call points, IO units and other notification devices. Suitable for applications to BS5839 Part 1, ZRx460 VADs may be addressed as standalone units, operating in isolation by signals from its programmed inputs, as part of a group where several units in the same location are synchronized to operate simultaneously, or be operated by both arrangements.

Dual Power Sources

Power for the ZRx460 series is derived from two supervised, independent battery sources, given these units a service interval of 3 to 5 years, depending on the frequencies of site specific, fire tests. Standard off-the-shelf batteries are used allowing for easy and low cost maintenance.

  • Tamper monitoring support
  • VAD synchronization support

Ordering

ZRW460-3C Ziton ZRW460-3C Wireless Beacon, Wall Mount /w Battery Pack (RED w/ CLEAR Flash)
ZRW460-3WC Ziton ZRW460-3WC Wireless Beacon, Wall Mount /w Battery Pack (WHITE w/ CLEAR Flash)

ZRW460-3WC datasheet