Netgear M4500-32C 100GE-Enabled Managed Switch

HomeInfrastructureNetgearNetgear SwitchesNetgear M4500-32C 100GE-Enabled Managed Switch

Netgear M4500-32C 100GE-Enabled Managed Switch

  • Cost effective 100G aggregation and 10G access layer for AV deployments
  • Zero Touch AV-over-IP with pre-configured L2 Multicast o
  •  Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite
  • Optimized for “Spine and Leaf” redundant AV installations, with or without MLAG between spine switches
SKU: CSM4532 Categories: , , Tag:

Description

Netgear M4500-32C is a 100GE-Enabled Managed Switch.  The trend of moving matrix switching into the Ethernet network is accelerating and a new class of switches has come to market. Combining the configurability of a matrix switch with the power and scalability of Ethernet, they support hundreds of AV over IP endpoints, at a price point dramatically lower than comparable matrix switches. The Layer 3 feature set includes static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM. Removing the need for PIM routing, these new switches offer IGMP Plus and greatly simplify system architectures with the same well-known IGMP techniques across the entire AV over IP network while still operating at Layer 2. Installers opting to use M4500-48XF8C switch in their installation will find that it is already preconfigured out of the box. It comes with 48 10G Fiber ports with 8 100G uplink ports with true AV and multicast Zero Touch network configuration. Connect AV over IP encoders and decoders, and power on the switch. It just works! Then use the M4500-32C switch to aggregate the edge switches for a complete set up in large projects up to 320×320 SDVoE (10Gb) devices in a single architecture.

  • Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies
  • Zero Touch AV-over-IP with pre-configured L2 Multicast on all models (10G AV encoders and decoders) and SDVoE-ready
  •  Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite
  • Optimized for “Spine and Leaf” redundant AV installations, with or without MLAG between spine switches
  • Up to 320 TX / 320 RX (10 Gigabit) Nodes all line rate with each other in a redundant spine and leaf architecture
  •  2 power supply units (APS750W) and 6 redudant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy
  • Ultra-low latency (spine 0.13µs @100G; leaf 0.119µs @10G) and scalable table size (32K MAC, 8K ARP, 4K VLANs, 32K routes)

Ordering

CSM4532-100EUS Netgear 32 x 40G/50G/100G QSFP28 ports, preconfigured for 100G – 2 x PSUs and  6x Fan Trays already installed. The M4500-32C offers 32-port QSFP28 preconfigured for 100G and can support 40G QSFP+ and 50G QSFP28 optics or DAC cables.  The M4500 switches offer 1+1 power and 4+2 fan redundancy, an x86 Intel Atom® Processor C3558 with 8GB DDR3/ECC RAM and 128GB SSD storage. Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies • Zero Touch AV-over-IP with pre-configured L2 Multicast on all models  (10G AV encoders and decoders) and SDVoE-ready • Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite • Optimized for “Spine and Leaf” redundant AV installations, with orwithout MLAG between spine switches • Up to 320 TX / 320 RX (10 Gigabit) Nodes all line rate with each other in a redundant spine and leaf architecture • 2 power supply units (APS750W) and 6 redudant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy • Ultra-low latency (spine 0.13μs @100G; leaf 0.119μs @10G) and scalable table size (32K MAC, 8K ARP, 4K VLANs, 32K routes)
XSM4556-100EUS Netgear 48 x 10G/25G SFP28 ports preconfigured for 10G and 8 x 40G/50G/100G – QSFP28 ports, preconfigured for 100G – 2 x PSUs and 6 xFan Trays already installed. The M4500-48XF8C offers 48-port SFP28 preconfigured for 10G with 8-port 100G QSFP28 uplinks, and the SFP28 ports can support 10G and 25G. The M4500 switches offer 1+1 power and 4+2 fan redundancy, an x86 Intel Atom® Processor C3558 with 8GB DDR3/ECC RAM and 128GB SSD storage.  Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies • Zero Touch AV-over-IP with pre-configured L2 Multicast on all models  (10G AV encoders and decoders) and SDVoE-ready • Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite • Optimized for “Spine and Leaf” redundant AV installations, with orwithout MLAG between spine switches • Up to 320 TX / 320 RX (10 Gigabit) Nodes all line rate with each other in a redundant spine and leaf architecture • 2 power supply units (APS750W) and 6 redudant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy • Ultra-low latency (spine 0.13μs @100G; leaf 0.119μs @10G) and scalable table size (32K MAC, 8K ARP, 4K VLANs, 32K routes)

Netgear M4500 datasheet

DOWNLOAD