Description
2010-2-UC240-KIT UltraSync communicator is a dual path alarm signaling unit for transmitting alarm signals from a customer’s alarm panel to a Central Monitoring Stations (CMS). The monitoring path is based on IP and SIM 4G/2G mobile technology. The 2010-2-UC240-KIT unit is designed for use in both security and fire systems.
- Dual-path monitoring for low, medium and high risk sites, covering intruder applications, fire and more.
- These monitored alarm signaling devices are small enough to fit inside most alarm panels. They use two signaling paths – if the primary path is down, the secondary path kicks in. And if that happens, the secondary path will use the primary path reporting and polling times.
- The primary path uses IP technology to send alarm signals over the customer’s network or broadband hub.
- The secondary path uses 4G or 2G mobile connectivity – with dual SIMs for extra resilience.
- EN50131 Grade 3 and EN50136 certified for intrusion systems.
- EN54-21 certified for fire alarm systems.
Alarm Panel Interfaces
- 16 general purpose alarm inputs (Logic High = +2 to +30 V / Logic Low = <1.3 V)
- 3 relay outputs
- Unconnected state: Logic Low
- Standard screw terminals
- Programmable function output-for remote control of site devices
- Line fault output-for status indication at site of alarm signaling path
- Dial Capture with phone line simulation
- Onboard RS232 or RS485 for direct panel interface to some panels
Dial Capture Features
- Converts dialer alarm systems into high security signaling devices
- Alarm panel interface supports: Ademco Contact ID, Ademco Hi Speed, Ademco 4+1, Ademco 4+2, SIA 1/2/3
Configuration
- Simple single push button pin learn
- iOS and Android installer app
- Using on board menu driven by push buttons